BD7542FVM-TR
Or copy the link below:
- Mfr.Part #
- BD7542FVM-TR
- Manufacturer
- ROHM Semiconductor
- Package / Case
- 8-VSSOP, 8-MSOP (0.110, 2.80mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8MSOP
- Stock
- 4,450
- In Stock ：
- 4,450
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- ROHM Semiconductor
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Channels :
- 2
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Temperature :
- -40°C~85°C
- REACH SVHC :
- No SVHC
- Terminal Pitch :
- 0.65mm
- Height Seated (Max) :
- 0.9mm
- Low-Bias :
- yes
- Radiation Hardening :
- No
- RoHS Status :
- ROHS3 Compliant
- Current - Input Bias :
- 1pA
- Input Offset Voltage (Vos) :
- 1mV
- Number of Terminations :
- 8
- Package / Case :
- 8-VSSOP, 8-MSOP (0.110, 2.80mm Width)
- Packaging :
- Tape and Reel (TR)
- Bandwidth :
- 600 kHz
- Terminal Form :
- Gull wing
- Nominal Supply Current :
- 650μA
- Pin Count :
- 8
- Frequency Compensation :
- yes
- Output Current per Channel :
- 1mA
- Contact Plating :
- Copper, Tin
- Terminal Position :
- Dual
- Low-Offset :
- No
- Supply Voltage :
- 12V
- Number of Pins :
- 8
- Voltage - Supply, Single/Dual (±) :
- 5V~14.5V ±2.5V~7.25V
- Mount :
- Surface Mount
- Operating Supply Voltage :
- 7.25V
- Output Current :
- 4mA
- Lead Free :
- Lead Free
- Unity Gain BW-Nom :
- 600 kHz
- Common Mode Rejection Ratio :
- 45 dB
- Published :
- 2012
- Factory Lead Time :
- 8 Weeks
- Output Type :
- Rail-to-Rail
- ECCN Code :
- EAR99
- Pbfree Code :
- yes
- Voltage Gain :
- 95dB
- Number of Functions :
- 2
- Mounting Type :
- Surface Mount
- Micropower :
- yes
- Supply Voltage Limit-Max :
- 15.5V
- Base Part Number :
- BD75*
- Amplifier Type :
- GENERAL PURPOSE
- Slew Rate :
- 0.6V/µs
- Operating Supply Current :
- 400μA
- Packing Method :
- Tape and Reel
- Architecture :
- VOLTAGE-FEEDBACK
- Datasheets
- BD7542FVM-TR
2 Channels 1mA per Channel 1pA 45 dB Instrumentational OP Amps 7.25V 5V~14.5V ±2.5V~7.25V BD75* 8 Pins 8-VSSOP, 8-MSOP (0.110, 2.80mm Width)
BD7542FVM-TR Overview
A 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 12V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 400μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 7.25V. The instrumentation amplifier is packed in the form of TAPE AND REEL.
BD7542FVM-TR Features
8 Pins
supply voltage of 12V
95dB voltage gain
Output Type: Rail-to-Rail
BD7542FVM-TR Applications
There are a lot of ROHM Semiconductor
BD7542FVM-TR Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
