EL5410CS
- Mfr.Part #
- EL5410CS
- Manufacturer
- Intersil
- Package / Case
- SOIC
- Datasheet
- Download
- Description
- IC OPAMP VFB 4 CIRCUIT 14SOIC
- Stock
- 10,973
- In Stock :
- 10,973
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Intersil
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Series :
- --
- Terminal Position :
- Dual
- Operating Temperature :
- -40°C ~ 85°C
- Current - Supply :
- 2.5mA
- Current - Output / Channel :
- 30mA
- Number of Terminations :
- 14
- Published :
- 2002
- Supplier Device Package :
- 14-SOIC
- Lead Free :
- Contains Lead
- Mounting Type :
- Surface Mount
- Common Mode Rejection Ratio :
- 45 dB
- Current - Input Bias :
- 2nA
- Output Type :
- Rail-to-Rail
- Output Current per Channel :
- 30mA
- Reach Compliance Code :
- not_compliant
- Min Operating Temperature :
- -40°C
- -3db Bandwidth :
- 30MHz
- RoHS Status :
- Non-RoHS Compliant
- Slew Rate :
- 33 V/μs
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Package / Case :
- SOIC
- Terminal Finish :
- Tin/Lead (Sn/Pb)
- Packaging :
- Tube
- Voltage - Supply, Single/Dual (±) :
- 4.5 V ~ 16.5 V, ±2.25 V ~ 8.25 V
- Terminal Form :
- Gull wing
- Max Operating Temperature :
- 85°C
- Number of Circuits :
- 4
- Min Dual Supply Voltage :
- 2.25V
- Height Seated (Max) :
- 1.7272mm
- Power Supply Rejection Ratio (PSRR) :
- 60dB
- Number of Pins :
- 14
- Mount :
- Surface Mount
- ECCN Code :
- EAR99
- Min Supply Voltage :
- 4.5V
- Gain Bandwidth Product :
- 20MHz
- Max Dual Supply Voltage :
- 8.25V
- Voltage Gain :
- 80dB
- Number of Elements :
- 4
- Amplifier Type :
- Operational Amplifier
- Terminal Pitch :
- 1.27mm
- Qualification Status :
- Not Qualified
- Max Supply Voltage :
- 16.5V
- Input Offset Voltage (Vos) :
- 3mV
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Temperature Grade :
- Industrial
- Operating Supply Current :
- 2.5mA
- Pin Count :
- 14
- Voltage - Input Offset :
- 3mV
- Number of Functions :
- 4
- Base Part Number :
- EL5410
- Peak Reflow Temperature (Cel) :
- 240
- JESD-609 Code :
- e0
- Datasheets
- EL5410CS

30mA per Channel 2nA 45 dB Instrumentational OP Amps 4.5 V ~ 16.5 V, ±2.25 V ~ 8.25 V EL5410 14 Pins SOIC
EL5410CS Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C ~ 85°C. A supply current of 2.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 80dB. This op amp ic has 4 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 4 elements in this buffer amplifier. For optimal performance, this electrical part should be connected to a supply with a current of 2.5mA. It is important to keep in mind that the power supply voltage of this electric component is below 16.5V, which is suitable. Keeping the linear amplifier's supply voltage above 4.5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 8.25V volts. Buffer op amp series numbers are indicated by the --.
EL5410CS Features
14 Pins
80dB voltage gain
Output Type: Rail-to-Rail
EL5410CS Applications
There are a lot of Intersil (Renesas Electronics America)
EL5410CS Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















