INA122PA
Or copy the link below:
- Mfr.Part #
- INA122PA
- Manufacturer
- Texas Instruments
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC INST AMP 1 CIRCUIT 8DIP
- Stock
- 1
- In Stock ：
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Width :
- 6.35mm
- Amplifier Type :
- Instrumentation
- Packaging :
- Tube
- Voltage Gain :
- 80dB
- Voltage - Supply, Single/Dual (±) :
- 2.2V~36V -0.9V/+1.3V~18V
- Thickness :
- 3.9mm
- Supply Voltage :
- 15V
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Input Offset Current-Max (IIO) :
- 0.005μA
- ECCN Code :
- EAR99
- Bandwidth :
- 120 kHz
- JESD-609 Code :
- e4
- Pbfree Code :
- yes
- Weight :
- 528.605208mg
- Output Current per Channel :
- 30mA
- Number of Terminations :
- 8
- Number of Pins :
- 8
- Pin Count :
- 8
- Factory Lead Time :
- 6 Weeks
- Voltage Gain-Nom :
- 100
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Nominal Supply Current :
- 85μA
- -3db Bandwidth :
- 0.12MHz
- Length :
- 9.81mm
- Number of Channels :
- 1
- Terminal Position :
- Dual
- Number of Functions :
- 1
- Gain Bandwidth Product :
- 120 kHz
- Input Offset Voltage (Vos) :
- 500μV
- Height :
- 5.08mm
- Quiescent Current :
- 60μA
- Base Part Number :
- INA122
- Voltage - Input Offset :
- 150μV
- Mounting Type :
- Through Hole
- Number of Elements :
- 2
- REACH SVHC :
- No SVHC
- Current - Input Bias :
- 10nA
- Surface Mount :
- No
- Slew Rate :
- 0.16V/μs
- Lead Free :
- Lead Free
- Max Supply Current :
- 85μA
- Lifecycle Status :
- ACTIVE (Last Updated: 1 day ago)
- Dual Supply Voltage :
- 9V
- Radiation Hardening :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Resistance :
- 10GOhm
- Common Mode Rejection Ratio :
- 76 dB
- Operating Temperature :
- -40°C~85°C
- Operating Supply Voltage :
- 5V
- Operating Supply Current :
- 60μA
- RoHS Status :
- ROHS3 Compliant
- Power Supply Rejection Ratio (PSRR) :
- 100dB
- Datasheets
- INA122PA
1 Channels 30mA per Channel 10nA 76 dB Instrumentational OP Amps 5V 2.2V~36V -0.9V/+1.3V~18V INA122 8 Pins 8-DIP (0.300, 7.62mm)
INA122PA Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the Instrumentation type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 500μV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 60μA, this op amp ic can operate. 80dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 5V. Currently, linear amplifier is operating with a quiescent current of 60μA. Instrumentation amplifier resistance should stay within the range of 10GOhm.
INA122PA Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm
INA122PA Applications
There are a lot of Texas Instruments
INA122PA Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
