INA132U/2K5
Or copy the link below:
- Mfr.Part #
- INA132U/2K5
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8SOIC
- Stock
- 16,458
- In Stock ：
- 16,458
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- JESD-609 Code :
- e4
- Terminal Form :
- Gull wing
- Operating Supply Voltage :
- 5V
- Terminal Position :
- Dual
- Dual Supply Voltage :
- 15V
- Voltage - Input Offset :
- 75μV
- Operating Temperature :
- -40°C~85°C
- Pin Count :
- 8
- Supply Voltage :
- 15V
- Resistance :
- 80kOhm
- Number of Functions :
- 1
- Bandwidth :
- 300 kHz
- Mounting Type :
- Surface Mount
- Number of Elements :
- 1
- Additional Feature :
- IT CAN ALSO OPERATE WITH 2.7V TO 36V SINGLE SUPPLY
- Nominal Supply Current :
- 185μA
- Number of Pins :
- 8
- Number of Channels :
- 1
- Weight :
- 75.891673mg
- Lifecycle Status :
- ACTIVE (Last Updated: 6 days ago)
- Voltage - Supply, Single/Dual (±) :
- 2.7V~36V ±1.35V~18V
- Slew Rate :
- 0.1V/μs
- Number of Terminations :
- 8
- Max Input Voltage :
- -2V
- Surface Mount :
- yes
- Amplifier Type :
- Differential
- Voltage Gain :
- 0dB
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Quiescent Current :
- 160μA
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Common Mode Rejection Ratio :
- 76 dB
- Length :
- 4.9mm
- Base Part Number :
- INA132
- Output Current per Channel :
- 12mA
- Packaging :
- Tape and Reel (TR)
- RoHS Status :
- ROHS3 Compliant
- Peak Reflow Temperature (Cel) :
- 260
- Lead Free :
- Lead Free
- Factory Lead Time :
- 12 Weeks
- Thickness :
- 1.58mm
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Pbfree Code :
- yes
- Input Offset Voltage (Vos) :
- 500μV
- Operating Supply Current :
- 160μA
- Radiation Hardening :
- No
- Moisture Sensitivity Level (MSL) :
- 3 (168 Hours)
- Analog IC - Other Type :
- ANALOG CIRCUIT
- Height :
- 1.75mm
- Width :
- 3.91mm
- Datasheets
- INA132U/2K5
1 Channels 12mA per Channel 76 dB Instrumentational OP Amps 5V 2.7V~36V ±1.35V~18V INA132 8 Pins 8-SOIC (0.154, 3.90mm Width)
INA132U/2K5 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 160μA and 10 . Maintain 0dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. There is an 160μA quiescent current in linear amplifier. It is important to keep the resistance within the 80kOhm range of the op amps. Besides the analog ICs used in this instrumentation amplifier, there is also another type of analog IC called ANALOG CIRCUIT IC. This buffer op amp has an additional benefit, which you can refer to as follows: IT CAN ALSO OPERATE WITH 2.7V TO 36V SINGLE SUPPLY.
INA132U/2K5 Features
8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 80kOhm
INA132U/2K5 Applications
There are a lot of Texas Instruments
INA132U/2K5 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
