INA132U
Or copy the link below:
- Mfr.Part #
- INA132U
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8SOIC
- Stock
- 2
- In Stock ：
- 2
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Length :
- 4.9mm
- RoHS Status :
- ROHS3 Compliant
- Output Current per Channel :
- 12mA
- Width :
- 3.91mm
- Supply Type :
- Dual, Single
- Voltage :
- 36V
- Resistance :
- 80kOhm
- Terminal Form :
- Gull wing
- Weight :
- 75.891673mg
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Pin Count :
- 8
- Bandwidth :
- 300 kHz
- Operating Temperature :
- -40°C~85°C
- Additional Feature :
- IT CAN ALSO OPERATE WITH 2.7V TO 36V SINGLE SUPPLY
- Input Offset Voltage (Vos) :
- 250μV
- Moisture Sensitivity Level (MSL) :
- 3 (168 Hours)
- Operating Supply Voltage :
- 5V
- Surface Mount :
- yes
- Amplifier Type :
- Differential
- Packaging :
- Tube
- Dual Supply Voltage :
- 15V
- Slew Rate :
- 0.1V/μs
- REACH SVHC :
- No SVHC
- JESD-609 Code :
- e4
- Analog IC - Other Type :
- ANALOG CIRCUIT
- Supply Voltage :
- 15V
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Nominal Supply Current :
- 160μA
- Number of Pins :
- 8
- Mounting Type :
- Surface Mount
- Peak Reflow Temperature (Cel) :
- 260
- Voltage - Input Offset :
- 75μV
- Voltage - Supply, Single/Dual (±) :
- 2.7V~36V ±1.35V~18V
- Number of Functions :
- 1
- Quiescent Current :
- 160μA
- Max Input Voltage :
- -2V
- Radiation Hardening :
- No
- Height :
- 1.75mm
- Voltage Gain :
- 0dB
- Base Part Number :
- INA132
- Number of Channels :
- 1
- ECCN Code :
- EAR99
- Number of Terminations :
- 8
- Thickness :
- 1.58mm
- Pbfree Code :
- yes
- Lead Free :
- Lead Free
- Lifecycle Status :
- ACTIVE (Last Updated: 1 day ago)
- Operating Supply Current :
- 160μA
- Common Mode Rejection Ratio :
- 76 dB
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Factory Lead Time :
- 6 Weeks
- Datasheets
- INA132U
1 Channels 12mA per Channel 76 dB Instrumentational OP Amps 5V 2.7V~36V ±1.35V~18V INA132 8 Pins 8-SOIC (0.154, 3.90mm Width)
INA132U Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 250μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 160μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 5V. There is a quiescent current of 160μA in this operational amplifier circuit. 80kOhm should be the range of resistance for the linear amplifier. There is also another type of analog IC used in this op amp ic that is called a ANALOG CIRCUIT-type IC. I would like to draw your attention to the following extra benefit of this buffer amplifier: IT CAN ALSO OPERATE WITH 2.7V TO 36V SINGLE SUPPLY.
INA132U Features
8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 80kOhm
INA132U Applications
There are a lot of Texas Instruments
INA132U Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
