LTC6254HMS#PBF
- Mfr.Part #
- LTC6254HMS#PBF
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- Axial
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 16MSOP
- Stock
- 10,252
- In Stock :
- 10,252
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Operating Temperature :
- -55°C ~ 175°C
- Length :
- 4.039 mm
- Surface Mount :
- yes
- Settling Time :
- 36 ns
- Min Operating Temperature :
- -40 °C
- Output Current per Channel :
- 90 mA
- Size / Dimension :
- 0.065 Dia x 0.150 L (1.65mm x 3.81mm)
- Manufacturer :
- Analog Devices Inc.
- Power (Watts) :
- 0.25W, 1/4W
- Mounting Style :
- SMD/SMT
- Voltage Gain dB :
- -
- Nominal Gain Bandwidth Product :
- 720 MHz
- JESD-609 Code :
- e3
- Features :
- Flame Retardant Coating, Moisture Resistant, Safety
- Common Mode Rejection Ratio :
- 85 dB
- Series :
- CMF
- Output Type :
- Rail-to-Rail
- Unity Gain BW-Nom :
- 630000 kHz
- Supply Voltage Limit-Max :
- 5.5 V
- Maximum Operating Temperature :
- + 125 C
- Current - Supply :
- 4.25mA (x4 Channels)
- JESD-30 Code :
- R-PDSO-G16
- Tolerance :
- ±1%
- Min Supply Voltage :
- 2.5 V
- Number of Pins :
- 16
- Terminal Position :
- Dual
- Brand :
- Analog Devices
- Composition :
- Metal Film
- Failure Rate :
- --
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Amplifier Type :
- Power Efficient Amplifier
- Number of Channels :
- 4 Channel
- Product Status :
- Active
- Average Bias Current-Max (IIB) :
- 0.7 µA
- Number of Functions :
- 4
- Pin Count :
- 16
- Package Shape :
- RECTANGULAR
- Power Supply Rejection Ratio (PSRR) :
- 68 dB
- Minimum Operating Temperature :
- - 40 C
- Qualification Status :
- Not Qualified
- Packaging :
- Tape and Reel (TR)
- Temperature Grade :
- Automotive
- Technology :
- CMOS
- Number of Terminations :
- 2
- Terminal Form :
- Gull wing
- Slew Rate :
- 280 V/µs
- RoHS :
- Details
- Package :
- Tube
- Number of Elements :
- 4
- Base Product Number :
- LTC6254
- Input Offset Voltage-Max :
- 1400 µV
- Reach Compliance Code :
- Compliant
- Current - Output / Channel :
- 100 mA
- Temperature Coefficient :
- ±100ppm/°C
- -3db Bandwidth :
- 400 MHz
- Manufacturer Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Width :
- 3 mm
- Package / Case :
- Axial
- Gain Bandwidth Product :
- 720 MHz
- Voltage Gain :
- 95.56 dB
- Product :
- High Speed Amplifiers
- Product Type :
- Op Amps - High Speed Operational Amplifiers
- Terminal Pitch :
- 0.5 mm
- Number of Terminals :
- 16
- Seated Height-Max :
- 1.1 mm
- Product Category :
- High Speed Operational Amplifiers
- Terminal Finish :
- Matte Tin (Sn)
- Operating Supply Current :
- 3.3 mA
- Input Bias Current :
- 1.4 µA
- Current - Input Bias :
- 1.4 µA
- Lifecycle Status :
- Production (Last Updated: 1 month ago)
- Mounting Type :
- Surface Mount
- Max Dual Supply Voltage :
- 2.625 V
- Subcategory :
- Amplifier ICs
- Brand Name :
- Analog Devices Inc
- Max Supply Voltage :
- 5.25 V
- Min Dual Supply Voltage :
- 1.25 V
- Voltage - Input Offset :
- 100 µV
- Pbfree Code :
- No
- Number of Circuits :
- 4
- Supplier Device Package :
- Axial
- Shutdown :
- No Shutdown
- Max Operating Temperature :
- 125 °C
- Resistance :
- 15.8 kOhms
- Input Offset Voltage (Vos) :
- 50 µV
- Height - Seated (Max) :
- --
- Input Type :
- Rail-to-Rail
- Datasheets
- LTC6254HMS#PBF

4 Channel Channels 90 mA per Channel 1.4 µA 85 dB Instrumentational OP Amps 0.7 µA 16 Pins Axial
LTC6254HMS#PBF Overview
In the package, you will find a Axial-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Power Efficient Amplifier-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 2 terminations. A total of 16 pins are located on this board. This particular linear amplifier is a type of Amplifier ICs device, to be precise. The op amp ic has an array of 16 pins on it. Op amp rates 50 µV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -55°C ~ 175°C , which is a good operating temperature. Using an 3.3 mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 95.56 dB for the time being. A instrumentation amplifier like this has 4 circuits. On the buffer amps, there are 4 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 4 elements make up the design of this buffer amplifier. There is a recommendation that this electrical part be used with a supply with 4.25mA (x4 Channels) current rating. This electric component can work from a voltage of under 5.25 V as far as supply voltage is concerned. A voltage of 2.5 V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 2.625 V volts when you conduct this part. In this case, CMF represents the instrumentation amplifiers' series number. During testing, the instrumentation amplifier resistance should remain within a range of 15.8 kOhms. 16 wire terminals are provided on this op amp.
LTC6254HMS#PBF Features
16 Pins
95.56 dB voltage gain
Output Type: Rail-to-Rail
Resistance of 15.8 kOhms
16Terminations
LTC6254HMS#PBF Applications
There are a lot of Analog Devices
LTC6254HMS#PBF Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















