MCP6002-I/SN

- Mfr.Part #
- MCP6002-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 1,492





- In Stock :
- 1,492
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage Gain :
- 112dB
- Slew Rate :
- 0.6V/µs
- Number of Channels per Chip :
- 2
- Low-Offset :
- No
- RoHS :
- Details
- Width :
- 3.9mm
- Peak Reflow Temperature (Cel) :
- 260
- Voltage - Input Offset :
- 4.5mV
- Nominal Supply Current :
- 100μA
- Supply Voltage :
- 5V
- Frequency Compensation :
- yes
- Number of Circuits :
- 2
- REACH SVHC :
- No SVHC
- Supplier Device Package :
- 8-SOIC
- Terminal Form :
- Gull wing
- Series :
- --
- Output Current :
- 23mA
- Package Type :
- SOIC
- Pbfree Code :
- yes
- Output Type :
- Rail-to-Rail
- Architecture :
- VOLTAGE-FEEDBACK
- Supply Voltage Limit-Max :
- 7V
- Power Supply Type :
- Single
- Operating Supply Current :
- 100 uA
- Qualification Status :
- Not Qualified
- Voltage Gain-Min :
- 25110
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Current - Input Bias :
- 1pA
- Product Category :
- Operational Amplifiers - Op Amps
- Manufacturer :
- Microchip
- Common Mode Rejection Ratio :
- 60 dB
- Shutdown :
- No Shutdown
- Rail to Rail :
- Rail to Rail Input/Output
- Minimum Operating Temperature :
- -40 °C
- Supply Type :
- Single
- Amplifier Type :
- GENERAL PURPOSE
- Base Product Number :
- MCP6002
- Package :
- Tube
- Height :
- 1.75mm
- Seated Height-Max :
- 1.75 mm
- Operating Supply Voltage :
- 5.5V
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Micropower :
- yes
- Packaging :
- Tube
- Supply Current-Max :
- 0.34 mA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Brand :
- Microchip Technology / Atmel
- Current - Output / Channel :
- 23mA
- Programmable Power :
- No
- Product Type :
- Op Amps - Operational Amplifiers
- Mounting Type :
- Surface Mount
- Number of Channels :
- 2
- Number of Functions :
- 2
- Type :
- 1 MHz, Low Power Op Amp
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Low-Bias :
- yes
- Factory Lead Time :
- 8 Weeks
- Base Part Number :
- MCP6002
- Number of Terminations :
- 8
- Mounting Style :
- SMD/SMT
- Reach Compliance Code :
- Compliant
- Temperature Grade :
- Industrial
- RoHS Status :
- ROHS3 Compliant
- Output Current per Channel :
- 23 mA
- Pin Count :
- 8
- Number of Pins :
- 8
- Bandwidth :
- 1MHz
- Operating Temperature :
- -40°C~85°C
- JESD-609 Code :
- e3
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Length :
- 4.9mm
- Input Offset Voltage (Vos) :
- 4.5mV
- Power :
- No
- Radiation Hardening :
- No
- Unity Gain BW-Nom :
- 1000 kHz
- Lead Free :
- Lead Free
- Voltage Gain dB :
- 112 dB
- Gain Bandwidth Product :
- 1MHz
- Terminal Finish :
- Matte Tin (Sn)
- Terminal Position :
- Dual
- HTS Code :
- 8542.39.00.01
- Surface Mount :
- yes
- ECCN Code :
- EAR99
- Max Junction Temperature (Tj) :
- 150°C
- Current - Supply :
- 100μA
- Number of Terminals :
- 8
- Terminal Pitch :
- 1.27 mm
- Product :
- Operational Amplifiers
- Product Status :
- Active
- Package Shape :
- RECTANGULAR
- Input Offset Voltage-Max :
- 4500 µV
- Power Supplies :
- 2/5 V
- Maximum Operating Temperature :
- +85 °C
- Qualification :
- AEC-Q100
- Published :
- 2003
- Wideband :
- No
- Mount :
- Surface Mount
- JESD-30 Code :
- R-PDSO-G8
- MSL :
- -
- Datasheets
- MCP6002-I/SN

2 Channels 23 mA per Channel 1pA 60 dB Instrumentational OP Amps 5.5V 1.8V~6V MCP6002 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6002-I/SN Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 4.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 100 uA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 5.5V. As a recommendation, this electronic component should be used with a power supply that can deliver 100µA. The -- indicates the series number of the op amp. There is a minimum voltage gain of 25110 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6002-I/SN Features
8 Pins
supply voltage of 5V
112dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6002-I/SN Applications
There are a lot of Microchip Technology
MCP6002-I/SN Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.