MCP6031-E/SN
- Mfr.Part #
- MCP6031-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 472
- In Stock :
- 472
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Package Type :
- SOIC N
- Series :
- --
- Product Category :
- Precision Amplifiers
- Bandwidth :
- 10kHz
- Shut Down Feature :
- No
- Micropower :
- yes
- Pin Count :
- 8
- Terminal Position :
- Dual
- Base Product Number :
- MCP6031
- Supply Type :
- Single
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Terminal Finish :
- Matte Tin (Sn)
- Rad Hardened :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Output Current per Channel :
- 23 mA
- Voltage Gain dB :
- 115 dB
- Peak Reflow Temperature (Cel) :
- 260
- Length :
- 4.9mm
- Input Offset Voltage :
- 0.15(mV)
- Qualification :
- AEC-Q100
- Low-Bias :
- yes
- Width :
- 3.9mm
- Operating Temp Range :
- -40C to 125C
- Dual Supply Voltage (Min) :
- Not Required(V)
- Common Mode Rejection Ratio :
- 70 dB
- Number of Elements :
- 1
- Terminal Form :
- Gull wing
- Factory Lead Time :
- 8 Weeks
- Single Supply Voltage (Typ) :
- 3/5(V)
- Height :
- 1.5mm
- Number of Channels :
- 1
- Voltage Gain :
- 115dB
- Operating Supply Voltage :
- 1.8 V to 5.5 V
- Dual Supply Voltage (Typ) :
- Not Required(V)
- MSL :
- MSL 1 - Unlimited
- Voltage Gain in dB :
- 115(dB)
- Amplifier Type :
- GENERAL PURPOSE
- Number of Terminations :
- 8
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Product :
- Precision Amplifiers
- Power Supply Rejection Ratio :
- 70(dB)
- Operating Temperature :
- -40°C~125°C
- ECCN Code :
- EAR99
- Output Current :
- 23mA
- Input Bias Current :
- 0.1(nA)
- Low-Offset :
- yes
- Nominal Supply Current :
- 900nA
- Minimum Operating Temperature :
- - 40 C
- Gain Bandwidth Product :
- 10kHz
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Base Part Number :
- MCP6031
- Brand :
- Microchip Technology / Atmel
- Product Type :
- Precision Amplifiers
- Current - Supply :
- 900nA
- Radiation Hardening :
- No
- Min Input Voltage :
- 1.8V
- Number of Functions :
- 1
- Operating Supply Current :
- 900 nA
- Package :
- Tube
- Mount :
- Surface Mount
- Power Supply Requirement :
- Single
- Power Supplies :
- 2/5V
- Unity Gain Bandwidth Product :
- 0.01
- Product Status :
- Active
- Programmable Power :
- No
- RoHS :
- Details
- Lead Free :
- Lead Free
- Current - Input Bias :
- 1pA
- Voltage - Input Offset :
- 150μV
- Manufacturer :
- Microchip
- Maximum Operating Temperature :
- + 125 C
- Reach Compliance Code :
- Compliant
- Supply Voltage :
- 1.8V
- RoHS Status :
- ROHS3 Compliant
- Type :
- PRECISION AMPLIFIER
- Supply Voltage Limit-Max :
- 7V
- Input Offset Voltage (Vos) :
- 150μV
- Number of Circuits :
- 1
- JESD-609 Code :
- e3
- Mounting Style :
- SMD/SMT
- Single Supply Voltage (Max) :
- 5.5(V)
- REACH SVHC :
- No SVHC
- Max Input Voltage :
- 5.5V
- Operating Temperature Classification :
- Automotive
- Mounting :
- Surface Mount
- Supplier Device Package :
- 8-SOIC
- Packaging :
- Tube
- Frequency Compensation :
- yes
- Mounting Type :
- Surface Mount
- Slew Rate :
- 0.004V/µs
- Shutdown :
- No Shutdown
- Average Bias Current-Max (IIB) :
- 0.005μA
- Output Type :
- Rail-to-Rail
- Number of Pins :
- 8
- Architecture :
- VOLTAGE-FEEDBACK
- Max Frequency :
- 1kHz
- Single Supply Voltage (Min) :
- 1.8(V)
- Unity Gain BW-Nom :
- 10000 kHz
- Published :
- 2007
- Dual Supply Voltage (Max) :
- Not Required(V)
- Pbfree Code :
- yes
- Datasheets
- MCP6031-E/SN

1 Channels 23 mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 1.8 V to 5.5 V 1.8V~5.5V MCP6031 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6031-E/SN Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 1.8V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 150μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 900 nA, this op amp ic can operate. 115dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 1.8 V to 5.5 V. As a result, it is recommended that a power supply of 900nA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp.
MCP6031-E/SN Features
8 Pins
supply voltage of 1.8V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6031-E/SN Applications
There are a lot of Microchip Technology
MCP6031-E/SN Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















