MCP6231T-E/MC
- Mfr.Part #
- MCP6231T-E/MC
- Manufacturer
- Microchip Technology
- Package / Case
- 8-VFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8DFN
- Stock
- 3,565
- In Stock :
- 3,565
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Supply Voltage Limit-Max :
- 7V
- Number of Pins :
- 8
- Low-Bias :
- yes
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Functions :
- 1
- Supply Current-Max :
- 0.03 mA
- Supply Type :
- Single
- Operating Supply Voltage :
- 5.5V
- Maximum Operating Temperature :
- + 125 C
- Brand :
- Microchip Technology
- Pbfree Code :
- yes
- Reach Compliance Code :
- Compliant
- Terminal Pitch :
- 0.5mm
- Unity Gain BW-Nom :
- 300 kHz
- Current - Input Bias :
- 1pA
- Lead Free :
- Lead Free
- RoHS Status :
- ROHS3 Compliant
- Shutdown :
- No Shutdown
- Operating Temperature :
- -40°C~125°C
- Factory Lead Time :
- 17 Weeks
- Number of Channels per Chip :
- 1
- Packaging :
- Tape and Reel (TR)
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Maximum Operating Supply Voltage :
- 6 V
- Product Category :
- Operational Amplifiers - Op Amps
- ECCN Code :
- EAR99
- Product Status :
- Active
- Surface Mount :
- yes
- Power Supplies :
- 2/5V
- Power :
- No
- Number of Elements :
- 1
- Product Type :
- Op Amps - Operational Amplifiers
- Common Mode Rejection Ratio :
- 61 dB
- Number of Circuits :
- 1
- Voltage Gain :
- 110dB
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Packing Method :
- Tape and Reel
- Pin Count :
- 8
- Package / Case :
- 8-VFDFN Exposed Pad
- Gain Bandwidth Product :
- 300kHz
- Number of Channels :
- 1 Channel
- Output Current per Channel :
- 23 mA
- Mount :
- Surface Mount
- Number of Terminations :
- 8
- Package Shape :
- RECTANGULAR
- Mounting Style :
- SMD/SMT
- Operating Supply Current :
- 20 uA
- Voltage Gain-Min :
- 316000
- Number of Terminals :
- 8
- Manufacturer :
- Microchip
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Output Type :
- Rail-to-Rail
- Supplier Package :
- DFN EP
- Supply Voltage :
- 5V
- HTS Code :
- 8542.33.00.01
- Voltage Gain dB :
- 110 dB
- Seated Height-Max :
- 1 mm
- Input Offset Voltage (Vos) :
- 5mV
- Product :
- Operational Amplifiers
- Voltage - Input Offset :
- 5mV
- Low-Offset :
- No
- Input Offset Voltage-Max :
- 7000 µV
- Width :
- 3 mm
- Frequency Compensation :
- yes
- Supplier Device Package :
- 8-DFN (2x3)
- Programmable Power :
- No
- Micropower :
- yes
- Base Part Number :
- MCP6231
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Published :
- 2009
- Output Current :
- 23mA
- Qualification :
- AEC-Q100
- Minimum Operating Temperature :
- - 40 C
- Terminal Form :
- NO LEAD
- Base Product Number :
- MCP6231
- Height :
- 0.88 mm
- Radiation Hardening :
- No
- Nominal Supply Current :
- 20μA
- Type :
- General Purpose Amplifier
- Series :
- --
- JESD-609 Code :
- e3
- Mounting :
- Surface Mount
- Peak Reflow Temperature (Cel) :
- 260
- Wideband :
- No
- Current - Supply :
- 20μA
- Terminal Position :
- Dual
- Mounting Type :
- Surface Mount
- RoHS :
- Details
- Temperature Grade :
- Automotive
- Qualification Status :
- Not Qualified
- Amplifier Type :
- GENERAL PURPOSE
- JESD-30 Code :
- R-PDSO-N8
- Length :
- 3mm
- Common-mode Reject Ratio-Min :
- 61 dB
- Slew Rate :
- 0.15V/µs
- Architecture :
- VOLTAGE-FEEDBACK
- Datasheets
- MCP6231T-E/MC

1 Channel Channels 23 mA per Channel 1pA 61 dB Instrumentational OP Amps 5.5V 1.8V~6V MCP6231 8 Pins 8-VFDFN Exposed Pad
MCP6231T-E/MC Overview
In the package, you will find a 8-VFDFN Exposed Pad-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 20 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 20μA current rating. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 316000. 8 wire terminals are provided on this op amp.
MCP6231T-E/MC Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6231T-E/MC Applications
There are a lot of Microchip Technology
MCP6231T-E/MC Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















