MCP6282T-E/MS
- Mfr.Part #
- MCP6282T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 25,220
- In Stock :
- 25,220
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Low-Bias :
- yes
- Unity Gain BW-Nom :
- 5000 kHz
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Number of Pins :
- 8
- Product Status :
- Active
- Voltage - Input Offset :
- 3mV
- Micropower :
- yes
- Peak Reflow Temperature (Cel) :
- 260
- Dual Supply Voltage (Min) :
- Not Required(V)
- Output Current per Channel :
- 25mA
- Voltage - Supply, Single/Dual (±) :
- 2.2V~6V
- Power Supply Requirement :
- Single
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Manufacturer :
- Microchip
- RoHS :
- Details
- JESD-30 Code :
- S-PDSO-G8
- Supply Type :
- Single
- Amplifier Type :
- GENERAL PURPOSE
- Mounting Type :
- Surface Mount
- Product Category :
- Operational Amplifiers - Op Amps
- Base Part Number :
- MCP6282
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Height :
- 0.85 mm
- Factory Lead Time :
- 12 Weeks
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Number of Circuits :
- 2
- Single Supply Voltage (Min) :
- 2.2(V)
- Supply Voltage Limit-Max :
- 7V
- Shutdown :
- No Shutdown
- Brand :
- Microchip Technology / Atmel
- Bandwidth :
- 5MHz
- Packaging :
- Tape and Reel (TR)
- Supply Current-Max :
- 1.14 mA
- Supply Voltage :
- 5V
- Maximum Operating Temperature :
- + 125 C
- Operating Temperature Classification :
- Automotive
- Mounting Style :
- SMD/SMT
- Average Bias Current-Max (IIB) :
- 0.005μA
- Type :
- General Purpose Amplifier
- Terminal Form :
- Gull wing
- Qualification Status :
- Not Qualified
- Published :
- 2008
- Seated Height-Max :
- 1.1 mm
- Input Offset Voltage-Max :
- 5000 µV
- Mount :
- Surface Mount
- Terminal Pitch :
- 0.65mm
- Current - Supply :
- 450μA
- Package Type :
- MSOP
- Minimum Operating Temperature :
- - 40 C
- Supplier Device Package :
- 8-MSOP
- Output Current :
- 25mA
- Max Operating Temperature :
- 125 °C
- JESD-609 Code :
- e3
- Height Seated (Max) :
- 1.1mm
- Terminal Finish :
- Matte Tin (Sn)
- Screening Level :
- Extended Industrial
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Low-Offset :
- No
- Terminal Position :
- Dual
- Voltage Gain-Min :
- 31620
- ECCN Code :
- EAR99
- Dual Supply Voltage (Max) :
- Not Required(V)
- Pin Count :
- 8
- Min Operating Temperature :
- -40 °C
- Reach Compliance Code :
- Compliant
- Base Product Number :
- MCP6282
- Max Supply Voltage :
- 5.5 V
- Number of Channels :
- 2 Channel
- Operating Temperature :
- -40°C~125°C
- Product Type :
- Op Amps - Operational Amplifiers
- Rad Hardened :
- No
- Nominal Supply Current :
- 450μA
- Mounting :
- Surface Mount
- Slew Rate :
- 2.5V/µs
- Input Offset Voltage (Vos) :
- 3mV
- Common Mode Rejection Ratio :
- 70 dB
- Operating Supply Voltage :
- 5.5 V
- Output Type :
- Rail-to-Rail
- Temperature Grade :
- Automotive
- Frequency Compensation :
- yes
- Voltage Gain dB :
- 110 dB
- Packing Method :
- Tape and Reel
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Current - Input Bias :
- 1pA
- Input Offset Voltage :
- 3(mV)
- RoHS Status :
- ROHS3 Compliant
- Surface Mount :
- yes
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Lead Free :
- Lead Free
- Number of Terminals :
- 8
- Pbfree Code :
- yes
- Shut Down Feature :
- No
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Operating Supply Current :
- 450μA
- Single Supply Voltage (Max) :
- 6(V)
- Current - Output / Channel :
- 25mA
- Width :
- 3 mm
- Gain Bandwidth Product :
- 5MHz
- Min Supply Voltage :
- 2.2 V
- HTS Code :
- 8542.33.00.01
- Power Supply Rejection Ratio :
- 70(dB)
- Product :
- Operational Amplifiers
- Maximum Operating Supply Voltage :
- 5.5 V
- Number of Elements :
- 2
- Voltage Gain in dB :
- 110(dB)
- Unity Gain Bandwidth Product :
- 5
- Number of Channels per Chip :
- 2
- Operating Temp Range :
- -40C to 125C
- Single Supply Voltage (Typ) :
- 3/5(V)
- Radiation Hardening :
- No
- MSL :
- MSL 2 - 1 year
- Series :
- --
- Package Shape :
- Square
- Number of Functions :
- 2
- Number of Terminations :
- 8
- Power Supplies :
- 2.5/5 V
- Architecture :
- VOLTAGE-FEEDBACK
- Voltage Gain :
- 110dB
- Supplier Package :
- MSOP
- Qualification :
- AEC-Q100
- Length :
- 3mm
- Input Bias Current :
- 0.001(nA)
- Datasheets
- MCP6282T-E/MS

2 Channel Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.2V~6V MCP6282 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6282T-E/MS Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 450μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 450µA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2.2 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 31620. 8 wire terminals are provided on this op amp.
MCP6282T-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6282T-E/MS Applications
There are a lot of Microchip Technology
MCP6282T-E/MS Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















