MCP6292-E/P
- Mfr.Part #
- MCP6292-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DIP
- Stock
- 1,356
- In Stock :
- 1,356
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Qualification Status :
- Not Qualified
- Type :
- General Purpose Amplifier
- Terminal Form :
- THROUGH-HOLE
- Power Supply Requirement :
- Single
- Package :
- Tube
- Max Input Voltage :
- 6V
- Base Product Number :
- MCP6292
- Number of Elements :
- 2
- Max Supply Voltage :
- 5.5 V
- Low-Bias :
- yes
- Rail to Rail :
- Rail to Rail Input/Output
- Maximum Operating Supply Voltage :
- 5.5 V
- Package Type :
- PDIP
- Supplier Device Package :
- 8-PDIP
- Base Part Number :
- MCP6292
- Terminal Position :
- Dual
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Dimensions :
- 9.27 x 6.35 x 3.3mm
- Number of Channels per Chip :
- 2
- Number of Functions :
- 2
- Min Input Voltage :
- 2.4V
- Operating Temperature Classification :
- Automotive
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Frequency Compensation :
- yes
- Seated Height-Max :
- 4.32 mm
- Power :
- No
- Input Offset Voltage-Max :
- 5000 µV
- MSL :
- -
- Lead Free :
- Lead Free
- Power Supply Rejection Ratio :
- 70(dB)
- Product Type :
- Op Amps - Operational Amplifiers
- Low-Offset :
- No
- Number of Terminals :
- 8
- Number of Amplifiers :
- 2
- Common Mode Rejection Ratio :
- 70 dB
- Height :
- 4.953mm
- Voltage Gain dB :
- 110 dB
- Shutdown :
- No Shutdown
- Maximum Input Voltage :
- 6 V
- Supply Voltage Limit-Max :
- 7V
- HTS Code :
- 8542.33.00.01
- Average Bias Current-Max (IIB) :
- 0.005μA
- Factory Lead Time :
- 10 Weeks
- Operating Supply Voltage :
- 5 V
- Micropower :
- No
- Voltage Gain :
- 110dB
- Brand :
- Microchip Technology / Atmel
- Current - Output / Channel :
- 25mA
- Nominal Supply Current :
- 1mA
- Current - Supply :
- 1mA
- Architecture :
- VOLTAGE-FEEDBACK
- Product :
- Operational Amplifiers
- Terminal Pitch :
- 2.54 mm
- Number of Pins :
- 8
- Minimum Operating Temperature :
- -40 °C
- Single Supply Voltage (Typ) :
- 3/5(V)
- Power Supplies :
- 2.5/5 V
- Screening Level :
- Extended Industrial
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Unity Gain BW-Nom :
- 10000 kHz
- Shut Down Support :
- No
- Programmable Power :
- No
- Output Type :
- Rail-to-Rail
- Terminal Finish :
- Matte Tin (Sn)
- Voltage - Input Offset :
- 3mV
- REACH SVHC :
- No SVHC
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Min Operating Temperature :
- -40 °C
- Max Operating Temperature :
- 125 °C
- Input Offset Voltage (Vos) :
- 3mV
- Amplifier Type :
- GENERAL PURPOSE
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Wideband :
- No
- Radiation Hardening :
- No
- Bandwidth :
- 10MHz
- Product Status :
- Active
- Length :
- 10.16mm
- Package Shape :
- RECTANGULAR
- Dual Supply Voltage (Min) :
- Not Required(V)
- Mounting :
- Through Hole
- Power Supply Type :
- Single
- Reach Compliance Code :
- Compliant
- Operating Temperature :
- -40°C~125°C
- Mounting Type :
- Through Hole
- Product Category :
- Operational Amplifiers - Op Amps
- Manufacturer :
- Microchip
- Output Current per Channel :
- 25mA
- Voltage Gain in dB :
- 110(dB)
- RoHS Status :
- ROHS3 Compliant
- Max Frequency :
- 10kHz
- Output Current :
- 25mA
- Min Supply Voltage :
- 2.4 V
- Series :
- --
- Packaging :
- Tube
- Number of Channels :
- 2
- Supply Current-Max :
- 2.6 mA
- Operating Temp Range :
- -40C to 125C
- Pin Count :
- 8
- Operating Supply Current :
- 1mA
- Input Offset Voltage :
- 3(mV)
- Input Bias Current :
- 0.001(nA)
- JESD-30 Code :
- R-PDIP-T8
- Input Voltage Range :
- 2.4 → 6 V
- Shut Down Feature :
- No
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Dual Supply Voltage (Max) :
- Not Required(V)
- Number of Terminations :
- 8
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Current - Input Bias :
- 1pA
- Maximum Operating Temperature :
- +125 °C
- Published :
- 2004
- JESD-609 Code :
- e3
- Voltage Gain-Min :
- 31620
- Moisture Sensitivity Level (MSL) :
- Not Applicable
- Rad Hardened :
- No
- Width :
- 7.112mm
- Unity Gain Bandwidth Product :
- 10
- Mount :
- Through Hole
- Single Supply Voltage (Min) :
- 2.4(V)
- Qualification :
- AEC-Q100
- Surface Mount :
- No
- Supply Voltage :
- 5V
- Supplier Package :
- PDIP
- Supply Type :
- Single
- ECCN Code :
- EAR99
- RoHS :
- Details
- Single Supply Voltage (Max) :
- 6(V)
- Number of Circuits :
- 2
- Pbfree Code :
- yes
- Mounting Style :
- Through Hole
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Slew Rate :
- 7V/µs
- Temperature Grade :
- Automotive
- Gain Bandwidth Product :
- 10MHz
- Datasheets
- MCP6292-E/P

2 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5 V 2.4V~6V MCP6292 8 Pins 8-DIP (0.300, 7.62mm)
MCP6292-E/P Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. For this electronic part, it is recommended that you mount it with type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 1mA . 110dB should be the voltage gain. A linear amplifier like this has 2 circuits on it. Op amp ic has 2 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. In order for this buffer op amp to function, it should have a temperature of at least -40 °C degrees Celsius. At temperatures greater than 125 °C, Instrumentation amplifier should not be used. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5 V. We recommend that you use this electronic part with an 1mA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 5.5 V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.4 V. The -- represents the op amp's series number. This operational amplifier can conduct a voltage gain of up to 31620 at a minimum. On the linear amplifier, there are 2 amplifiers that are used. A total of 8 terminals are available on this buffer op amp for the connection of wires.
MCP6292-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6292-E/P Applications
There are a lot of Microchip Technology
MCP6292-E/P Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















