MCP6402T-H/SN
- Mfr.Part #
- MCP6402T-H/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 3,312
- In Stock :
- 3,312
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Mounting Type :
- Surface Mount
- Nominal Supply Current :
- 45µA
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Low-Bias :
- yes
- Mount :
- Surface Mount
- Mounting :
- Surface Mount
- Base Product Number :
- MCP6402
- Brand :
- Microchip Technology / Atmel
- RoHS :
- Compliant
- Mounting Style :
- SMD/SMT
- Terminal Position :
- Dual
- Number of Terminations :
- 8
- Temperature Grade :
- Automotive
- Qualification :
- AEC-Q100
- Packaging :
- Tape and Reel (TR)
- Screening Level :
- Extended
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Min Supply Voltage :
- 1.8 V
- Terminal Form :
- Gull wing
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Type :
- Single
- Number of Channels :
- 2
- Product Type :
- Op Amps - Operational Amplifiers
- Current - Output / Channel :
- 15 mA
- Output Current per Channel :
- 15 mA
- Input Offset Voltage (Vos) :
- 4.5mV
- Peak Reflow Temperature (Cel) :
- 260
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Product :
- Operational Amplifiers
- HTS Code :
- 8542.39.00.01
- Micropower :
- yes
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Surface Mount :
- yes
- Voltage Gain-Min :
- 17780
- Packing Method :
- Tape and Reel
- Current - Supply :
- 45µA
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Published :
- 2011
- Length :
- 4.9mm
- Minimum Operating Temperature :
- - 40 C
- Pin Count :
- 8
- Current - Input Bias :
- 1pA
- Supply Voltage Limit-Max :
- 7V
- Power Supply Rejection Ratio (PSRR) :
- 63dB
- Reach Compliance Code :
- Compliant
- Seated Height-Max :
- 1.75 mm
- Common Mode Rejection Ratio :
- 56 dB
- Input Bias Current :
- 100 pA
- Supplier Device Package :
- 8-SOIC
- Number of Functions :
- 2
- Maximum Operating Supply Voltage :
- 6 V
- Shutdown :
- No Shutdown
- Number of Pins :
- 8
- Factory Lead Time :
- 2 Weeks
- Series :
- --
- Max Operating Temperature :
- 150 °C
- Low-Offset :
- No
- Supplier Package :
- SOIC N
- Maximum Operating Temperature :
- + 125 C
- Slew Rate :
- 0.5V/μs
- Amplifier Type :
- GENERAL PURPOSE
- Architecture :
- VOLTAGE-FEEDBACK
- Product Category :
- Operational Amplifiers - Op Amps
- Gain Bandwidth Product :
- 1MHz
- Output Current :
- 15mA
- JESD-609 Code :
- e3
- Number of Terminals :
- 8
- Operating Temperature :
- -40°C~150°C
- Radiation Hardening :
- No
- Manufacturer :
- Microchip
- Number of Channels per Chip :
- 2
- Operating Supply Voltage :
- 8, 35 V
- Supply Current-Max :
- 0.18 mA
- Frequency Compensation :
- yes
- ECCN Code :
- EAR99
- Package Shape :
- RECTANGULAR
- Width :
- 3.9 mm
- Input Offset Voltage-Max :
- 4500 µV
- Power Supplies :
- 2/5 V
- Unity Gain BW-Nom :
- 1000 kHz
- Type :
- General Purpose Amplifier
- Max Supply Voltage :
- 6 V
- Voltage - Input Offset :
- 800μV
- Voltage Gain :
- 110dB
- Product Status :
- Active
- RoHS Status :
- ROHS3 Compliant
- Supply Voltage :
- 1.8V
- Output Type :
- Rail-to-Rail
- Terminal Pitch :
- 1.27 mm
- Number of Elements :
- 2
- Number of Circuits :
- 2
- Qualification Status :
- Not Qualified
- JESD-30 Code :
- R-PDSO-G8
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Operating Supply Current :
- 45 uA
- Bias Current-Max (IIB) @25C :
- 0.0001μA
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Min Operating Temperature :
- -40 °C
- Height Seated (Max) :
- 1.75mm
- Base Part Number :
- MCP6402
- Datasheets
- MCP6402T-H/SN

2 Channels 15 mA per Channel 1pA 56 dB Instrumentational OP Amps 0.0001μA 8, 35 V 1.8V~6V MCP6402 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6402T-H/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 1.8V battery. The op amp ic has an array of 8 pins on it. Op amp rates 4.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~150°C , which is a good operating temperature. Using an 45 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 150 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8, 35 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 45µA current rating. This electric component can work from a voltage of under 6 V as far as supply voltage is concerned. A voltage of 1.8 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 17780. 8 wire terminals are provided on this op amp.
MCP6402T-H/SN Features
8 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6402T-H/SN Applications
There are a lot of Microchip Technology
MCP6402T-H/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















