MCP6421T-E/LTY
- Mfr.Part #
- MCP6421T-E/LTY
- Manufacturer
- Microchip Technology
- Package / Case
- 5-TSSOP, SC-70-5, SOT-353
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SC70-5
- Stock
- 8,830
- In Stock :
- 8,830
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Supply Current-Max :
- 0.0055 mA
- Bias Current-Max (IIB) @25C :
- 0.00005 µA
- Supply Voltage :
- 3V
- Unity Gain BW-Nom :
- 90 kHz
- Average Bias Current-Max (IIB) :
- 0.00005 µA
- Shutdown :
- No Shutdown
- Power Supply Rejection Ratio (PSRR) :
- 90dB
- Output Type :
- Rail-to-Rail
- Architecture :
- VOLTAGE-FEEDBACK
- Voltage Gain :
- 115dB
- Bandwidth :
- 90kHz
- Brand :
- Microchip Technology
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Qualification Status :
- Not Qualified
- Power Supplies :
- 2/5 V
- Product :
- Operational Amplifiers
- Number of Elements :
- 1
- HTS Code :
- 8542.33.00.01
- Number of Functions :
- 1
- Number of Circuits :
- 1
- Number of Terminals :
- 5
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V ±0.9V~2.75V
- JESD-609 Code :
- e4
- Peak Reflow Temperature (Cel) :
- 260
- Shut Down Support :
- No
- Product Category :
- Operational Amplifiers - Op Amps
- Voltage - Input Offset :
- 1mV
- Number of Channels :
- 1 Channel
- Minimum Operating Temperature :
- - 40 C
- Packaging :
- Tape and Reel (TR)
- Input Voltage Noise Density :
- 95nV/sqrt Hz
- Mounting Type :
- Surface Mount
- Package / Case :
- 5-TSSOP, SC-70-5, SOT-353
- Mount :
- Surface Mount
- Pin Count :
- 16
- Input Offset Voltage-Max :
- 1000 µV
- Qualification :
- AEC-Q100
- Operating Supply Voltage :
- 1.8 V to 5.5 V
- Mounting Style :
- SMD/SMT
- Product Type :
- Op Amps - Operational Amplifiers
- Low-Offset :
- No
- Power Supply Type :
- Single
- ECCN Code :
- EAR99
- Common-mode Reject Ratio-Min :
- 70 dB
- Published :
- 2003
- Input Offset Voltage (Vos) :
- 1mV
- Operating Temperature :
- -40°C~125°C
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Programmable Power :
- No
- Series :
- --
- Amplifier Type :
- GENERAL PURPOSE
- Product Status :
- Active
- Width :
- 1.25 mm
- Maximum Operating Temperature :
- + 125 C
- Number of Pins :
- 5
- Base Product Number :
- MCP6421
- Manufacturer :
- Microchip
- Slew Rate :
- 0.05V/µs
- Current - Supply :
- 4.4μA
- Temperature Grade :
- Automotive
- JESD-30 Code :
- R-PDSO-G5
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Terminal Position :
- Dual
- Voltage Gain-Min :
- 56200
- Gain Bandwidth Product :
- 90kHz
- Low-Bias :
- yes
- Screening Level :
- TS 16949
- Current - Input Bias :
- 1pA
- Package Shape :
- RECTANGULAR
- Factory Lead Time :
- 7 Weeks
- Frequency Compensation :
- yes
- Micropower :
- yes
- Seated Height-Max :
- 1.1 mm
- RoHS :
- Details
- Terminal Pitch :
- 0.65 mm
- Terminal Form :
- Gull wing
- Wideband :
- No
- Packing Method :
- Tape and Reel
- Common Mode Rejection Ratio :
- 70 dB
- Supply Voltage Limit-Max :
- 6.5 V
- RoHS Status :
- ROHS3 Compliant
- Operating Supply Current :
- 4.4μA
- Length :
- 2mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Base Part Number :
- MCP6421
- Supplier Device Package :
- SC-70-5
- Surface Mount :
- yes
- Power :
- No
- Output Current per Channel :
- 22mA
- Number of Terminations :
- 5
- MSL :
- MSL 1 - Unlimited
- Reach Compliance Code :
- Compliant
- Datasheets
- MCP6421T-E/LTY

1 Channel Channels 22mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00005 µA 1.8 V to 5.5 V 1.8V~5.5V ±0.9V~2.75V MCP6421 16 Pins 5-TSSOP, SC-70-5, SOT-353
MCP6421T-E/LTY Overview
Packaged in a 5-TSSOP, SC-70-5, SOT-353 case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 4.4μA, this op amp ic can operate. 115dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 Channel channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 1.8 V to 5.5 V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As a result, it is recommended that a power supply of 4.4µA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 56200. The buffer op amp is equipped with 5 terminals for attaching wires to it.
MCP6421T-E/LTY Features
16 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
5Terminations
MCP6421T-E/LTY Applications
There are a lot of Microchip Technology
MCP6421T-E/LTY Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















