MCP669-E/ML
- Mfr.Part #
- MCP669-E/ML
- Manufacturer
- Microchip Technology
- Package / Case
- 16-VQFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 16QFN
- Stock
- 779
- In Stock :
- 779
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Height :
- 950μm
- Nominal Supply Current :
- 6mA
- Lead Free :
- Lead Free
- Number of Functions :
- 4
- Supply Current-Max :
- 36 mA
- Operating Temperature :
- -40°C~125°C
- Operating Supply Voltage :
- 4.5, 42 V
- Type :
- General Purpose Amplifier
- Input Offset Voltage-Max :
- 8000 µV
- Operating Supply Current :
- 6mA
- JESD-609 Code :
- e3
- Length :
- 4mm
- Supply Voltage Limit-Max :
- 6.5V
- Number of Circuits :
- 4
- Terminal Pitch :
- 0.65mm
- Number of Channels per Chip :
- 4
- Package :
- Tube
- Input Offset Voltage (Vos) :
- 1.8mV
- Power Supply Type :
- Single
- Programmable Power :
- No
- Terminal Form :
- NO LEAD
- Amplifier Type :
- GENERAL PURPOSE
- Screening Level :
- Extended
- Wideband :
- No
- Terminal Position :
- QUAD
- Average Bias Current-Max (IIB) :
- 0.005μA
- JESD-30 Code :
- S-PQCC-N16
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Base Part Number :
- MCP669
- Published :
- 2012
- Architecture :
- VOLTAGE-FEEDBACK
- Low-Offset :
- No
- Number of Pins :
- 16
- Mounting Style :
- SMD/SMT
- Current - Supply :
- 6mA
- Mounting :
- Surface Mount
- Package / Case :
- 16-VQFN Exposed Pad
- Product :
- Operational Amplifiers
- RoHS Status :
- ROHS3 Compliant
- Series :
- --
- Low-Bias :
- yes
- Power Supplies :
- 3/5V
- Factory Lead Time :
- 18 Weeks
- Number of Channels :
- 4
- Gain Bandwidth Product :
- 60MHz
- Reach Compliance Code :
- Compliant
- Shutdown :
- No Shutdown
- Slew Rate :
- 32V/μs
- Number of Terminations :
- 16
- Maximum Operating Temperature :
- + 125 C
- Output Type :
- Rail-to-Rail
- Temperature Grade :
- Automotive
- Package Shape :
- Square
- Qualification Status :
- Not Qualified
- Micropower :
- No
- Seated Height-Max :
- 1 mm
- Shut Down Support :
- No
- REACH SVHC :
- No SVHC
- Product Status :
- Active
- Maximum Operating Supply Voltage :
- 5.5 V
- ECCN Code :
- EAR99
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- Voltage Gain-Min :
- 25100
- Voltage - Input Offset :
- 1.8mV
- HTS Code :
- 8542.39.00.01
- Number of Terminals :
- 16
- Supply Voltage :
- 2.5V
- Current - Input Bias :
- 6pA
- Current - Output / Channel :
- 90 mA
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Manufacturer :
- Microchip Technology Inc
- Supplier Package :
- QFN EP
- Base Product Number :
- MCP669
- Minimum Operating Temperature :
- - 40 C
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Peak Reflow Temperature (Cel) :
- 260
- Bandwidth :
- 60MHz
- Voltage Gain :
- 126dB
- Packaging :
- Tube
- Supplier Device Package :
- 16-QFN (4x4)
- Output Current per Channel :
- 80mA
- Packing Method :
- Tube
- Mounting Type :
- Surface Mount
- Frequency Compensation :
- yes
- Mount :
- Surface Mount
- Product Type :
- Op Amps - Operational Amplifiers
- Power :
- No
- Output Current :
- 90mA
- Pin Count :
- 16
- Common Mode Rejection Ratio :
- 64 dB
- Unity Gain BW-Nom :
- 60000 kHz
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Width :
- 4mm
- Surface Mount :
- yes
- Datasheets
- MCP669-E/ML

4 Channels 80mA per Channel 6pA 64 dB Instrumentational OP Amps 0.005μA 4.5, 42 V 2.5V~5.5V ±1.25V~2.75V MCP669 16 Pins 16-VQFN Exposed Pad
MCP669-E/ML Overview
The linear amplifier is packaged in a 16-VQFN Exposed Pad case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 16. Buffer amplifier has a total of 16 pins. Please take in mind that this instrumentation amplifier should be run at 2.5V. The buffer op amp includes 16 pins. Regarding input offset voltage, op amp rates 1.8mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 6mA. Voltage gain should remain at 126dB. There are 4 circuits on this op amp. The op amp ic has 4 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 4.5, 42 V. TUBE is adopted to pack the instrumentation amplifier. It is recommended that this electronic component be used with an 6mA supply. -- corresponds to the op amp's series. The minimum voltage gain this buffer op amp is able to conduct is 25100. This buffer amplifier is equipped with terminals for wires.
MCP669-E/ML Features
16 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
16Terminations
MCP669-E/ML Applications
There are a lot of Microchip Technology
MCP669-E/ML Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















