THS4503ID
Or copy the link below:
- Mfr.Part #
- THS4503ID
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8SOIC
- Stock
- 11,146
- In Stock ：
- 11,146
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Max I/O Voltage :
- -4mV
- Lead Free :
- Lead Free
- Current - Input Bias :
- 4μA
- Peak Reflow Temperature (Cel) :
- 260
- RoHS Status :
- ROHS3 Compliant
- Thickness :
- 1.58mm
- Architecture :
- VOLTAGE-FEEDBACK
- Micropower :
- No
- Pbfree Code :
- yes
- Voltage - Supply, Single/Dual (±) :
- 4.5V~15V ±2.25V~7.5V
- Radiation Hardening :
- No
- Terminal Position :
- Dual
- Slew Rate :
- 2800V/μs
- Resistance :
- 25kOhm
- Input Offset Current-Max (IIO) :
- 2µA
- Output Current per Channel :
- 120mA
- Base Part Number :
- THS4503
- ECCN Code :
- EAR99
- Number of Channels :
- 1
- Operating Supply Current :
- 23mA
- Terminal Form :
- Gull wing
- Voltage - Input Offset :
- 1mV
- Operating Temperature :
- -40°C~85°C
- Factory Lead Time :
- 6 Weeks
- Gain Bandwidth Product :
- 300MHz
- Surface Mount :
- yes
- Common Mode Rejection Ratio :
- 74 dB
- Voltage Gain :
- 54dB
- Packaging :
- Tube
- Pin Count :
- 8
- Low-Bias :
- No
- Power Supply Rejection Ratio (PSRR) :
- 72dB
- Nominal Supply Current :
- 28mA
- Contact Plating :
- Gold
- Lifecycle Status :
- ACTIVE (Last Updated: 4 days ago)
- JESD-609 Code :
- e4
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Width :
- 3.91mm
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Dual Supply Voltage :
- 5V
- REACH SVHC :
- No SVHC
- Operating Supply Voltage :
- 5V
- Settling Time :
- 6.3 ns
- Supply Voltage :
- 5V
- Length :
- 4.9mm
- Number of Terminations :
- 8
- Number of Pins :
- 8
- Amplifier Type :
- Differential
- Max Power Dissipation :
- 1.02W
- Bias Current-Max (IIB) @25C :
- 4.6µA
- Input Offset Voltage (Vos) :
- 2.4mV
- Unity Gain BW-Nom :
- 300000 kHz
- Frequency Compensation :
- yes
- -3db Bandwidth :
- 30MHz
- Height :
- 1.75mm
- Max Input Voltage :
- -1.3V
- Programmable Power :
- No
- Number of Functions :
- 1
- Low-Offset :
- No
- Weight :
- 75.891673mg
- Power Dissipation :
- 1.02W
- Mounting Type :
- Surface Mount
- Average Bias Current-Max (IIB) :
- 5.2μA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Bandwidth :
- 370MHz
- Datasheets
- THS4503ID
1 Channels 120mA per Channel 4μA 74 dB Instrumentational OP Amps 5.2μA 5V 4.5V~15V ±2.25V~7.5V THS4503 8 Pins 8-SOIC (0.154, 3.90mm Width)
THS4503ID Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2.4mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 23mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 5V. 25kOhm should be the range of resistance for the linear amplifier.
THS4503ID Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 25kOhm
THS4503ID Applications
There are a lot of Texas Instruments
THS4503ID Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
