TL082BCDT
Or copy the link below:
- Mfr.Part #
- TL082BCDT
- Manufacturer
- STMicroelectronics
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP JFET 2 CIRCUIT 8SOIC
- Stock
- 19,869
- In Stock ：
- 19,869
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Operating Temperature :
- 0°C~70°C
- Pin Count :
- 8
- Height Seated (Max) :
- 1.75mm
- ECCN Code :
- EAR99
- Packing Method :
- Tape and Reel
- Unity Gain BW-Nom :
- 4000 kHz
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Slew Rate :
- 16V/µs
- Number of Terminations :
- 8
- Base Part Number :
- TL082
- Frequency Compensation :
- yes
- Number of Pins :
- 8
- Current - Input Bias :
- 20pA
- Number of Circuits :
- 2
- Common Mode Rejection Ratio :
- 80 dB
- Gain Bandwidth Product :
- 4MHz
- Input Offset Voltage (Vos) :
- 1mV
- Voltage Gain :
- 106.02dB
- Low-Bias :
- yes
- Time@Peak Reflow Temperature-Max (s) :
- 30
- Lifecycle Status :
- ACTIVE (Last Updated: 7 months ago)
- Number of Functions :
- 2
- Amplifier Type :
- J-FET
- Factory Lead Time :
- 10 Weeks
- Terminal Position :
- Dual
- Peak Reflow Temperature (Cel) :
- 260
- Supply Voltage :
- 15V
- Architecture :
- VOLTAGE-FEEDBACK
- Length :
- 4.9mm
- Mounting Type :
- Surface Mount
- Mount :
- Surface Mount
- Power Supplies :
- +-15V
- Voltage - Supply, Single/Dual (±) :
- 6V~36V ±3V~18V
- RoHS Status :
- ROHS3 Compliant
- JESD-609 Code :
- e3
- Operating Supply Current :
- 1.4mA
- Output Current per Channel :
- 40mA
- Packaging :
- Tape and Reel (TR)
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Terminal Form :
- Gull wing
- Radiation Hardening :
- No
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Input Offset Current-Max (IIO) :
- 0.004μA
- Terminal Finish :
- Matte Tin (Sn)
- Low-Offset :
- No
- Datasheets
- TL082BCDT
[Instrumentation, OP Amps, Buffer Amps STMicroelectronics TL082BCDT] Overview
Introducing the TL082BCDT by STMicroelectronics, a groundbreaking integrated circuit meticulously crafted to elevate your electronic designs to unprecedented levels of precision and reliability. Renowned for its exceptional performance and versatility, this IC OPAMP JFET 2 CIRCUIT 8SOIC is engineered to meet the exacting demands of modern instrumentation, operational amplifier, and buffer amplifier applications.
With a legacy of excellence in semiconductor innovation, STMicroelectronics delivers a product that seamlessly integrates into your circuit designs, empowering you to achieve unparalleled results in your projects.
TL082BCDT Features
- Dual operational amplifier in a single package
- JFET input stages ensure high input impedance and low input bias current
- Wide supply voltage range: ±3 V to ±22 V
- Low input offset voltage and drift
- High slew rate: 16 V/μs
- Low noise: 18 nV/√Hz typical at f = 1 kHz
- Internally trimmed offset voltage
- Low power consumption: 1.4 mA per amplifier typical
- Industry-standard pinout for easy integration into existing designs
TL082BCDT Applications
- Signal Conditioning Circuits
- Audio Preamplifiers
- Active Filters
- Buffer Amplifiers
Utilize the TL082BCDT in signal conditioning circuits to precisely amplify, filter, or modify signals for further processing in applications such as sensor interfaces, data acquisition systems, and instrumentation.
Employ the TL082BCDT in audio preamplifiers to accurately amplify weak signals from microphones, musical instruments, or other audio sources, ensuring faithful reproduction of sound in recording studios, sound reinforcement systems, and home audio equipment.
Integrate the TL082BCDT into active filter circuits to tailor the frequency response of signals in communication systems, equalization circuits, and tone control applications, achieving precise control over the spectral content of signals.
Deploy the TL082BCDT as buffer amplifiers to isolate signal sources from load effects, maintain signal integrity, and drive multiple loads with minimal distortion in applications such as test and measurement equipment, electronic instrumentation, and industrial control systems.
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
