TLC2201CDG4
- Mfr.Part #
- TLC2201CDG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 23
- In Stock :
- 23
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage - Supply, Single/Dual (±) :
- 4.6V~16V ±2.3V~8V
- Base Part Number :
- TLC2201
- Output Type :
- Rail-to-Rail
- Peak Reflow Temperature (Cel) :
- 260
- Number of Terminations :
- 8
- Programmable Power :
- No
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Number of Pins :
- 8
- Bandwidth :
- 1.9MHz
- Output Current per Channel :
- 50mA
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Factory Lead Time :
- 6 Weeks
- Voltage - Input Offset :
- 100μV
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Architecture :
- VOLTAGE-FEEDBACK
- Operating Supply Current :
- 1.1mA
- Operating Temperature :
- 0°C~70°C
- Low-Offset :
- yes
- Output Current :
- 50mA
- Low-Bias :
- yes
- Number of Channels :
- 1
- Max I/O Voltage :
- 500μV
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Series :
- LinCMOS™
- Slew Rate :
- 2.7V/μs
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Height :
- 1.75mm
- Packaging :
- Tube
- Supply Voltage Limit-Max :
- 8V
- Lead Free :
- Lead Free
- Operating Supply Voltage :
- 8V
- Length :
- 4.9mm
- Nominal Supply Current :
- 1.5mA
- Common Mode Rejection Ratio :
- 85 dB
- Input Offset Voltage (Vos) :
- 500μV
- Pbfree Code :
- yes
- Pin Count :
- 8
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Micropower :
- No
- REACH SVHC :
- No SVHC
- Supply Voltage :
- 5V
- RoHS Status :
- ROHS3 Compliant
- Mounting Type :
- Surface Mount
- Number of Functions :
- 1
- Unity Gain BW-Nom :
- 1900 kHz
- ECCN Code :
- EAR99
- Radiation Hardening :
- No
- Amplifier Type :
- GENERAL PURPOSE
- JESD-609 Code :
- e4
- Current - Input Bias :
- 1pA
- Power Dissipation :
- 725mW
- Width :
- 3.91mm
- Terminal Position :
- Dual
- Nominal Gain Bandwidth Product :
- 1.9MHz
- Surface Mount :
- yes
- Terminal Form :
- Gull wing
- Frequency Compensation :
- yes
- Thickness :
- 1.58mm
- Voltage Gain :
- 109.97dB
- Datasheets
- TLC2201CDG4

1 Channels 50mA per Channel 1pA 85 dB Instrumentational OP Amps 8V 4.6V~16V ±2.3V~8V TLC2201 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLC2201CDG4 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 1.1mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 8V. The LinCMOS™ indicates the series number of the op amp.
TLC2201CDG4 Features
8 Pins
supply voltage of 5V
109.97dB voltage gain
Output Type: Rail-to-Rail
TLC2201CDG4 Applications
There are a lot of Texas Instruments
TLC2201CDG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















