CD4052B
- Mfr.Part #
- CD4052B
- Manufacturer
- onsemi
- Package / Case
- 16-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC SWITCH SP4T DUAL DIE
- Stock
- 20,276
- In Stock :
- 20,276
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- onsemi
- Product Category :
- Analog Switches, Multiplexers, Demultiplexers
- Number of Functions :
- 1
- Turn On Delay Time :
- 720 ns
- Quiescent Current :
- 80nA
- Drain to Source Resistance :
- 125Ohm
- Base Part Number :
- CD4052
- Factory Lead Time :
- 6 Weeks
- Normal Position :
- NC
- Min Dual Supply Voltage :
- 2.5V
- Thickness :
- 3.9mm
- Mount :
- Through Hole
- Length :
- 19.3mm
- Switch Circuit :
- SP4T
- On-State Resistance (Max) :
- 240Ohm
- Max Dual Supply Voltage :
- 9V
- REACH SVHC :
- No SVHC
- Output :
- SEPARATE OUTPUT
- Polarity :
- Non-Inverting
- Package / Case :
- 16-DIP (0.300, 7.62mm)
- On-state Resistance Match-Nom :
- 15Ohm
- Multiplexer/Demultiplexer Circuit :
- 4:1
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Channel-to-Channel Matching (ΔRon) :
- 5 Ω
- Voltage - Supply, Single/Dual (±) :
- 3V~20V ±2.5V~9V
- Bandwidth :
- 25MHz
- Number of Circuits :
- 2
- Weight :
- 951.693491mg
- Operating Supply Current :
- 80nA
- Number of Bits :
- 4
- Off-state Isolation-Nom :
- 40 dB
- Lead Free :
- Lead Free
- Pin Count :
- 16
- Number of Inputs :
- 8
- Contact Plating :
- Gold
- Mounting Type :
- Through Hole
- Current - Leakage (IS(off)) (Max) :
- 100nA
- Max Input Voltage :
- 20V
- Power Supplies :
- 5/15V
- Channel Capacitance (CS(off), CD(off)) :
- 0.2pF 18pF
- Width :
- 6.35mm
- Propagation Delay :
- 60 ns
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Crosstalk :
- -40dB @ 10MHz
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Min Supply Voltage :
- 3V
- Turn-Off Delay Time :
- 450 ns
- Packaging :
- Tube
- Height :
- 5.08mm
- JESD-609 Code :
- e3
- Supply Current-Max (Isup) :
- 3mA
- Supply Type :
- Dual, Single
- RoHS Status :
- ROHS3 Compliant
- Signal Current-Max :
- 0.01A
- Number of Terminations :
- 16
- Number of Pins :
- 16
- Supply Voltage :
- 5V
- Radiation Hardening :
- No
- Switching :
- BREAK-BEFORE-MAKE
- Resistance :
- 240Ohm
- Operating Supply Voltage :
- 18V
- Number of Channels :
- 4
- Max Supply Voltage :
- 20V
- Logic Function :
- Multiplexer
- Terminal Finish :
- Matte Tin (Sn)
- Operating Temperature :
- -55°C~125°C TA
- Nominal Supply Current :
- 80nA
- ECCN Code :
- EAR99
- Datasheets
- CD4052B
SP4T 240Ohm Analog Switches BREAK-BEFORE-MAKE CD4052 16 Pins 100nA 5V 16-DIP (0.300, 7.62mm)
CD4052BE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a number of circuits 4:1. Operational temperature extended around -55°C~125°C TA. 16 terminations have been made so far. Due to its 4 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 16 pins. Multiplexers built on a SP4T switching circuit are built. It consists of 2 circuits. Try searching for the analog switch ic with CD4052 if you are looking for variants. As far as internal resistance is concerned, it has 240Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Users shouldn't supply more than 20V voltage to the switch device. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 3V. This digital switch can be operated with a current of 80nA. Despite this switch's dual supply capability, its voltage should not exceed 9V. When using dual power supplies, you should attach at least 2.5V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating voltages range from 18V. The 8 inputs need to be operated in order to work. 25MHz-bandwidths can be used to transfer data between multiplexers. There is 125Ohm resistance between Drain and Source for this electronic part. 4-bits are supported.
CD4052BE Features
4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 25MHz
Drain-to-Source resistance: 125Ohm
4-Bit
CD4052BE Applications
There are a lot of Texas Instruments
CD4052BE Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- New designs requiring multiplexer functions
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















