UC1825VTD1
Or copy the link below:
- Mfr.Part #
- UC1825VTD1
- Manufacturer
- Texas Instruments
- Package / Case
- Die
- Datasheet
- Download
- Description
- UC1825VTD1
- Stock
- 14,081
- In Stock ：
- 14,081
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- DC DC Switching Controllers
- Frequency - Switching :
- 400kHz~1MHz
- Package / Case :
- Die
- Number of Pins :
- 0
- Output Voltage :
- 5.1V
- Surface Mount :
- yes
- Radiation Hardening :
- yes
- Min Operating Temperature :
- 25°C
- Packaging :
- Tube
- Rise Time :
- 30ns
- Function :
- Step-Up, Step-Up/Step-Down
- Operating Supply Voltage :
- 30V
- Base Part Number :
- UC1825
- Synchronous Rectifier :
- No
- Control Features :
- Current Limit, Frequency Control, Ramp, Soft Start
- Additional Feature :
- ALSO OPERATES WITH VOLTAGE MODE CONTROL
- Output Configuration :
- Positive
- Analog IC - Other Type :
- SWITCHING CONTROLLER
- Duty Cycle (Max) :
- 50%
- Terminal Position :
- UPPER
- Control Mode :
- CURRENT-MODE
- Output Type :
- Transistor Driver
- Max Operating Temperature :
- 25°C
- Output Phases :
- 1
- ECCN Code :
- EAR99
- Factory Lead Time :
- 8 Weeks
- Max Duty Cycle :
- 80 %
- RoHS Status :
- Non-RoHS Compliant
- Lifecycle Status :
- ACTIVE (Last Updated: 2 weeks ago)
- Output Current :
- 2A
- Number of Outputs :
- 2
- Control Technique :
- PULSE WIDTH MODULATION
- Voltage - Supply (Vcc/Vdd) :
- 8.4V~22V
- Number of Terminations :
- 21
- Fall Time (Typ) :
- 30 ns
- Topology :
- Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
- Lead Free :
- Contains Lead
- Datasheets
- UC1825VTD1
21 Terminals 8.4V~22V 0-Pin UC1825 DC to DC converter IC SWITCHING CONTROLLER 2 Outputs 400kHz~1MHz Transistor Driver
UC1825VTD1 Overview
As a result of Die compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 8.4V~22V is the supply voltage and the operating voltage of the dc control. The switching controller is capable of switching at the 400kHz~1MHz position. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at UPPER. There are many different types of terminations for 21. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A search for "UC1825" will reveal other relevant dc to dc converter ics. 0 pins are present on switching converter. Statistically, the DC regulator outputs 5.1V voltage. It's important to remember that the dc dc regulator's normaloutput current is 2A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 80 % to ensure reliability during power-up and power-down. DC to DC voltage regulator has the value of ALSO OPERATES WITH VOLTAGE MODE CONTROL to better satisfy the requirement. A circuit should contain 30V in order to ensure the voltage regulator dc to dc runs safely and reliably. A temperature 25°C lower than 25°C should be maintained. A temperature of 25°C more than 25°C degrees Celsius should be maintained in the undc regulator.
UC1825VTD1 Features
Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
ALSO OPERATES WITH VOLTAGE MODE CONTROL
UC1825VTD1 Applications
There are a lot of Texas Instruments
UC1825VTD1 DC to DC converter applications.
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
- Injection molding machinery
You may place an order without registering to Xinshop. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
